imaWorx CXP-12 Quad

设备功能

处理器

Xilinx Ultrascale+ KU3P

板载内存

1,5 GByte DDR4-RAM

I/O模块接口（信号触发和同步）

Trigger/GPIO-IF (Opto Trigger, TTL Trigger)

相机接口

标准

CoaXPress 2.0/2.1

接口

CXP-12

配置

CXP-12; up to 4 cameras

接头

4 x Micro-BNC/HD-BNC

功率输出

17W/24V DC regulated power per CXP connector

相机支持

area scan camera, line scan camera

芯片类型

Grayscale sensor, CFA sensor (Bayer), RGB sensor

芯片分辨率

32k*64k (area scan sensor), 16k (line scan sensor)

位深

8-16-bit (grayscale), 24-48-bit (color)

数据带宽

4 x 12,5 Gbit/s

数据带宽（每个端口；总计）

12,5 Gbps; 50 Gbps

端口数

4

测试环境

Camera Simulator

主机PC接口

PC总线接口

PCIe 3.1 x8

PC总线接口性能

7876 MB/s (theoretical), 6520 MB/s (typical/max.)

控件和通用I/O

触发板GPIO接口

Box connector (34-pin)

板载GPIO接口

One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)

板载前端GPIO接口

3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL-complaint output signals; configurable by software GPIOTool; max. voltage of the input signals between 4,5V and 25V

GPIO同步和控制

Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization

GPIO接口概述

onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (configuration dependent), 2 TTL outputs

处理功能

基本功能

Invert, LUT, Mirroring, White Balance, ROI, Image Selector

物理和环境信息

尺寸

PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height

重量（典型值）

274 g

功耗/电源

Typ. 13,4W@12V, excluding camera and I/O power output

操作温度

0 - 50°C (32°F - 122°F)

存储温度

-50 - 80°C (-58°F - 176°F)

相对湿度（操作、存储）

5% - 90% non-condensing (operating), 0% - 95% (storage)

MTBF

48.440 h

合规

KC, WEEE, REACH, RoHS, CE class A, FCC class B

软件

软件驱动程序

Linux 64-Bit, Windows 11 / 10 (32-Bit), Windows 11 / 10 (64-Bit)

软件工具

microDisplay X (Acquisition control and viewer), microDiagnostics (Analysis and service tool), GenICam Explorer (Camera configuration tool), SDK, Documentation, Device Drivers, pylon Software Suite

软件API

Framegrabber SDK, .net interface, pylon SDKs

BV-软件兼容性

Halcon, VisionPro, Labview